State-of the-art solutions power for today´s and tomorrow´s enterprise
The Smartbitt SBOL1KRT-2 is an online, single-phase UPS system, delivering the ultimate power protection to mission-critical equipment, medium-sized servers, vital network components, storage systems and VoIP infrastructures. Its tower convertible rack mount design means that it can be mounted either in a vertical or horizontal configuration. Monitoring is simplified by a state-of-the art multifunction LCD display that provides access to configuration tools, system information and THE operation status of the UPS in real time. This series brings a robust combination of low input current distortion, a wide voltage regulation range and power factor correction (PFC) capabilities for exceptional performance, reduced utility costs, runtime scalability, and cooler operating conditions. Available in 1kVA-220V capacities, this UPS emerges as a highly-efficient and flexible power distribution system optimized in a small footprint.
INPUT
NEMA → 5-15P
Voltaje nominal → 220 VAC
Rango de voltaje → 55/150 VAC ± 5% o ± 5% a 50% carga
Rango de Frecuencia → 80/150 VAC ± 5% o ± 5% a 100% carga 40Hz ~ 70 Hz
Fase → Monofásico con toma de tierra
Factor de poder → ≧ 0.99
OUTPUT
NEMA → (4 Nemas) 5-15/20R
Voltaje de salida → 220 VAC
Regulación de voltaje AC (Modo Batería) → ± 1%
Rango de frecuencia (Rango de sincronización) → 48~52Hz o 58~62Hz
Rango de frecuencia (Modo Batería) → 50 Hz ± 0.2 Hz o 60Hz ± 0.2 Hz
Rango cresta actual → 3:1
Distorsión Armónica (Modo Línea) → ≤3% (Línea de carga)
Tipo de onda(Modo batería) → Senoidal pura
EFFICIENCY
Modo AC → 88.2%
Modo ECO → 94%
Modo Batería → 84.6%
BATTERY
MODELO ESTÁNDAR
Tipo de batería → 12 V / 7 Ah
Números → 3
Tiempo de recarga típica → Recuperación en 4Hrs al 90% de su capacidad
Corriente de carga (máx.) → 1.0 A
Voltaje de corriente → 41.1 VDC ±1%
MODELO LONG-RUN
Tipo de batería → Dependiendo de su aplicacion
Números → 3
Corriente de carga (máx.) →1A
Voltaje de corriente → 41.1 VDC ±1%
INDICATORS
Panel LCD → Estado UPS, el nivel de carga, nivel de batería, voltaje de entrada/ salida, temporizador de descarga, y las condiciones de falla
ALARM
Modo batería → Sonando cada 4 segundos
Batería baja → Sonando cada segundo
Sobrecarga → Sonando dos veces cada segundo
Critica → Continuamente sonando
PHYSICAL CHARACTERISTICS
MODELO ESTÁNDAR
Dimensiones. DxWxH(mm) → 510 x 438 x 88
Peso neto (kgs) → 18.4
MODELO LONG RUN
Dimensiones. DxWxH(mm) → 510 x 438 x 88
Peso neto (kgs) → 11.3
OPERATING ENVIRONMENT
Humedad relativa → 20-90% RH @ 0-40°C (No condensada)
Nivel de ruido → Menos de 50 dB a 1 metro
MANAGEMENT
Smart RS-232/USB → Soporta Windows 2000/2003/XP/Vista/2008,Windows 7/8, Linux,Unix, y MAC
Póliza por defecto → Monitoreo y administración de UPS, vía SNMP por internet.
Why a UPS is critical for the continuity and sustainability of your business?
Online topology for greater peace of mind
Since this is the only topology that offers zero-transfer time to battery mode, it affords the highest level of protection against the most critical power problems
Advanced power protection
Stay protected, connected, and safe with outlets providing surge suppression, voltage regulation and noise filtering capabilities
Maximize productivity
Keep your connected devices performing at their best, uninterrupted, and more reliably over time
Backup time
Standard integrated batteries offer around 15 minutes* of runtime at half load
Operational reliability
Output power factor of 0.9, frequency-conversion mode and generator compatible
Flexible, scalable architecture
Allows the connection of external battery banks for added redundancy and the future expansion of the UPS capacity to keep up with changing energy demands
Dedicated monitoring software
Enhanced communication and control capabilities offer improved visibility and management of the system, whether remotely or on site
Business-grade quality
Experience the advantages of a robust construction, resulting in simplified maintenance and reduced cost of ownership
*Runtimes may vary depending on the battery level and the quantity of the connected loads
Recommended applications
– Medium-sized servers
– Core network equipment
– High-performance computer systems
– VoIP infrastructure
– Critical-operation facilities
– ATMs and financial institutions
– TV stations
– Telecommunications and cable companies
– Universities
– Small and medium-sized medical equipment
